Once the biaxial cnc machine fails, it is necessary to quickly repair it if you want to solve the fault, whether you can find the problem is the key to quickly solve the problem, when the machine tool cannot be used, we must first view the machine tool as a whole. Look at which part of the failure, and then targeted to solve the problem. In this way, the maintenance efficiency can be better.

What is a CNC lathe? It is a process product that combines automated machine tools and computers, which has precision measurement capabilities and product processing capabilities integrated together. This equipment has the characteristics of high efficiency in making accessories products. Compared with traditional lathes, traditional lathes are bulky and do not have repeated operability, so modern CNC products are extremely outstanding in terms of ability performance. The more precise the product, the higher the probability of failure will be, compared with traditional lathe products, CNC products the probability of problems is about 40% higher than traditional products, first of all, we have to check the appearance of the lathe, after understanding first-hand information, detailed analysis will eliminate the problem.

After the overall color viewing to smell whether there is a smell, if there is a smell is to show that the CNC lathe manufacturer products, intense friction movement in the electrical insulation layer is burned, in this case will produce odor, such as the taste of burnt, if the fault lathe has ozone smell then it shows that it has a discharge phenomenon, this time to immediately cut off its power supply, Carry out internal line search, find the problem, immediately repair the line to solve the problem.

After finding that there is a problem with the biaxial cnc machine, even if the local position has been found, do not blindly carry out maintenance, first of all, ask the operator, in general, the probability of machine problems due to misoperation reaches more than 40%, which can be said to be one of the reasons for more failures. To ask the operator to understand what kind of situation occurs when the fault occurs, such as abnormal sound or logical failure of the lathe, and then analyze and judge according to these actual conditions, so that you can accurately judge which part of the problem occurs after ensuring that the local location is found, so as to facilitate rapid maintenance.

In the maintenance process to be done according to such steps, first of all to check the system parameters, to ensure that there is no problem in the system parameters, and then to check other parts, such as whether there is 500 or 501 alarm after the lathe stops working, resulting in the lathe can not work normally, after the system inspection, to use a variety of ways to check. Under normal circumstances, CNC lathe can not work properly because its system has a fault, once this problem can be restarted after the power supply is cut off, so that the fault can be eliminated. After using the above methods, it is still found that the lathe has a fault problem, then most of the problems are in the line, in this case, it is necessary to completely disassemble the lathe, the details of the fault are repaired, usually due to physical damage or leakage problems caused by the fault is relatively serious, in this case, the damaged parts are related. Testing should be carried out to avoid the expansion of the problem, and the lathe operation with hidden dangers is easy to damage.

biaxial cnc machine https://www.zjshuangzheng.com/